Welcome to PHS Online!

Performance Design OD 6500

This 14-inch open-ended heavy duty punch is easy to set up with pre-set paper stop positions. Designed for the customer who may change dies less often it features a two-bolt "easy change" die system for changing dies in under three minutes.

Performance Design OD 4200 / 4300 / 4400

Shown above are the OD 4200 wire closer module, the OD 4300 coil inserter module, and the OD 4400 comb opener module. All four modules may be mounted on the OD 3500 Combo Binding Station (below).

Performance Design OD 3500

Combo binding station. Shown here with wire closer and coil inserter modules attached.

Performance Design HD7700 Ultima Punch

The HD-7700 Ultima is an exceptional Table Top Punch that has no equal. Combining the Rhin-O-Tuff patented Quick Change Die System with the following exciting new features:

New LED Diagnostic Display.
Patented Anti-Jam Feature Detects Punch Overload. Triggers Auto Reversing Function to Eliminate Punch Jams. Also features Manual Reversing as a Backup.
Punching Capacity at 55 Sheets or 110 Pages of 20 lb bond. Regardless of Punch Hole Pattern Used. (15,000 to 18,000 SPH) 90 Cycles Per Minute.
Punch up to 10 Plastic Mylar Sheets Regardless of Hole Pattern.
(depending on Mylar Mil thickness)
Upgradeable to an Automatic Punch.
Patented "QCDS", Quick Change Die System. No Tools, Nothing to Take Apart. All Punch Pins Easily Disengage.
The HD 7700 has more than 20 interchangeable Dies Available with 12 Standard Hole Patterns.
Comes With Your Choice of one Standard Die. (Ask for Details)
14" Open Ended Punching, Allows for Wider Applications.
Smooth, Quiet, Power on Demand Operation.
"Accu-Set" paper adjustment knob for fine adjustments on odd paper sizes.
Uses standard hands free Foot Pedal, or the Versa Trigger Switch or the New Palm Switch.
Extremely Durable All Metal Construction.
Extra High Capacity Waste Chip Tray with New View Access. No Sensors Needed.
New Paper Entry Chute for easy paper insertion.

Performance Design HD7000 Punch

The HD-7000 is a 14 inch (356 mm) open-ended punch that features the patented "quick change" die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The 7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a full year's warranty on both machine and the dies, this is truly the industry standard. You need look no further for the best.

Optional Features:

Versa Switch (for paper activated punching)
Commercial Chip Drawer
Commercial Die Rack [holds four (4) dies]

Performance Design CI-3000 Coil Inserter

The CI-3000 provides electric coil inserting and features our patented Lexan Guide for easier insertion of all coil, particularly in books 9/16" thick and up. The unit will handle coil lengths from 6" to 36", providing you with more flexibility for large jobs and calendars.

Performance Design RAF-11 w/ attached HD-7000

The RAF-11 holds up to 5 reams of 20 lb bond paper including tabs, feeding at up to 30,000 sheets per hour. It has continuous feed and take away and is microprocessor controlled. You can upgrade your existing HD 6500 and HD 7000 Punches.

The patented "Quick Change Die System" Die can be changed in less than 30 seconds.

Features:

Affordable upgrade to an Auto Punch
Quick change die and easy paper setup
Short paper path
Small footprint
Manual mode feed and punching
Continuous feed and removal
Punch mixed stocks with tabs

Benefits:

Allows user to maximize returns on punch investment cost
Allows quick turnaround for various job changes
Less than 15" paper path, reducing the chance for paper jams
Provides space for other requirements
Allows punch to be used for special cover stocks
Provides consistent optimum output
Increases productivity over manual feeding