Home | Monthly Specials | Company Profile | Our Clients | Equipment | Tech Support | Supplies | Contact Us

Copyright 2006, Paper Handling Solutions, Inc.
Site Design by Pat Frank

Numbering, Perfing and Scoring Systems

PHS carries a variety of numbering, perfing and scoring systems.

 

 Graphic Whizard 12000
Graphic Whizard 8000		 Graphic Whizard 6000
Graphic Whizard Creasemaster		  
Graphic Whizard 12000
Features
Speed: 12,000, 11 x 8.5"/A4 sheets per hour
Maximum Stock Size: 18" x 18" (45 cm x 45 cm)
Minimum Stock Size: 3"W x 5"L (7.6cm x 12.7cm)
Stock Weight: 12# - 12 point (45 - 250 gsm)
Impression Control: Electronically variable, crash up to 10-part sets
Electrical: 115V/60Hz/5A or 230V/50Hz/5A

Dimensions:

Length: 68" (1.73m) Width: 27" (0.69m) Height: 46" (1.17m) Weight: 325 lbs. (135 kg)
Number of job memories: 100
Maximum number of numbering positions: 100 per head per sheet
Maximum number of heads: 4
Drive Unit Type: Drive Unit Type: Pneumatic; compressor required but not supplied
Head Rotation: Lockable throughout 360 degrees
Repeat Action: Consecutive, 1x, 2x, 3x, 4x
Numbering Heads: 6 digit reverse standard (with 2 drop) 8 digit condensed optional "No" and letter prefix available
Inking System:

Ink pad with reservoir
Perforating Options: 2,4,6,8,12 TPI
MICROPERF Options: 42 or 72 TPI
Scoring blade options: Wide (standard) or narrow
Slitting Blade: Optional
Stand: Included
Register: Microprocessor controlled to .010" (0.25mm)
Capable of tireless, all day, every day running. Versatile and high speed. With features similar to the "8000", the "12000" adds higher production speeds while maintaining register and accuracy. From the 30 inch-long register board, to the individually pressure adjustable perf/score/slit, to the tireless pneumatic heads, to the conveyor outfeed delivery, everything about the GW 12000 is designed for years of trouble-free operation. All this and more at a cost per feature and specification unmatched in the industry.
  • 12,000 standard-size sheets per hour
  • 100-job memory to store numbering jobs
  • Up to 100 numbering positions per head per sheet
  • Automatic feed; Optional "vertical" air feed available
  • 1-4 PNEUMATIC numbering heads; compressor required but not supplied
  • Heads rotate & lock throughout 360 degrees for perfect register
  • 30 inch-long register board for easy set up & perfect register
  • Floor model on castors; doesn't need dedicated floor/table space
  • Crash number up to 10-part sets
  • Feed sets from the UNGLUED or glued side
  • Create "snap sets" while numbering
  • Perforating options: 2,4,6,8,12 TPI
  • Microperf options: 42 or 72 TPI
  • Scoring options: wide (standard) or narrow
  • Optional slitting blade available
  • Ability to control depth of each perf/score/slit independently
  • Accurate .010" register
  • Microprocessor controlled with forward & backward stepping for easy programming
Graphic Whizard 8000
Features
Electrical: 115V/60Hz/5A or 230V/50Hz/5A
Stand: Optional
Speed: 8,000, 11 x 8.5"/A4 sheets per hour
Number of Job Memories: 100
Maximum number of numbering positions: 100 per head per sheet
Maximum number of heads: 2
Numbering Heads: 6 digit reverse standard (with 2 drop) 8 digit condensed optional "No" and letter prefix available
Head Rotation: Lockable throughout 360 degrees

Repeat Action:

Consecutive, 1x, 2x, 3x, 4x
Inking System: Ink pad with reservoir
Perforating Blade Options: 2,4,6,8,12 TPI
Scoring Blade Options: Wide (standard) or narrow
MICROPERF Blade Options: 42 or 72 TPI
Slitting Blade: Optional
Minimum Stock Size: 3"W x 5"L (7.6cm x 12.7cm)
Maximum Stock Size: 18" x 18" (45 cm x 45 cm)
Stock Weight:

12# - 12 point (45 - 250 gsm)
Impression Control: Electronically variable, crash up to 10-part carbonless
Dimensions: Length: 44" (1.12m) Width: 27" (0.69m) Height: 46" (1.17m) Weight: 158 lbs. (72kg)
Drive Unit Type: Electronic
Register: Microprocessor controlled to .010" (0.25mm)
Heavy duty construction makes the GW 8000 ready to run all day, every day. A 100-job memory provides a fast job change over. Microprocessor control give the operator the ability to position up to 100 numbers per head, anywhere on each sheet. Feature for feature, spec for spec, it is the best value in the industry. Don't forget...the "8000" can be field-upgraded to the "12000" at any time.
  • 8,000 standard-size sheets per hour
  • 100 Job Memory to store numbering jobs
  • Up to 100 numbers per head per sheet
  • Up to 2 heads
  • Crash Number Up to 10 Part Carbonless
  • Feed Sets UNGLUED or Glued Side
  • Create Snap Sets While Numbering
  • Heads Rotate & lock throughout 360°
  • Perforating Options 2,4,6,8,12/Inch & Microperf
  • Wide or narrow score blade available
  • Optional Slitting blade available
  • Ability to Control Depth of Perf/Score/Slit independently
  • Microprocessor controlled with forward and backward stepping for easy programming
  • Automatic Feed
  • Simple Set Up
  • Easy To Operate
  • Accurate .010" Register
  • 5 Year Limited Warranty
  • Optional Conveyor Outfeed
  • Upgradable to GW 12000 at any time!
Graphic Whizard 6000
Features
Electrical: 115V/60Hz/5A or 230V/50Hz/5A
Maximum Stock Size: 18" x 18" (45 cm x 45 cm)
Stock Weight: 12# - 12 point (45 - 250 gsm)
Dimensions: Length: 44" (1.12m) Width: 27" (0.69m) Height: 16" (0.26m) Weight: 106 lbs. (48kg)
Drive Unit type: Electric Solenoid
Maximum number of numbering positions: 10 per head per sheet
Maximum number of heads: 2
Repeat Action: Consecutive, 1x, 2x, 3x, 4x

Head Rotation:

Lockable throughout 360 degrees
Numbering Heads: 6 digit standard (with 2 drop) 8 digit condensed optional "No" and letter prefix available
Impression Control: Electronically variable, crash up to 10 part sets
Inking System: Ink pad with reservoir
Perforating Options: 2,4,6,8,12 TPI
MICROPERF Options: 42 or 72 TPI
Scoring Options: Wide (standard) or narrow
Slitting Blade: Optional
Speed:

6,000, 11 x 8.5"/A4 sheets per hour
Minimum Stock Size: 3"W x 5"L (7.6 cm x 12.7 cm)
Stand: Optional
Register: Microprocessor controlled to .010" (0.25mm)
The most popular number/perf/score/slit machine in the business. Operating at speeds up to 6000 sheets per hour, the "6000" makes fast and easy work of your finishing needs. With the ability to upgrade to another model at any time in the future, combined with a 5-year limited warranty, you can't go wrong with the "6000".
  • 6,000 standard-size sheets per hour
  • Up to 10 numbers per head per sheet
  • 1 or 2 numbering heads
  • Heads rotate & lock throughout 360 degrees
  • Tabletop model; optional stand available
  • Crash number up to 10-part sets
  • Feed sets from the UNGLUED or glued side
  • Create "snap sets" while numbering
  • Perforating options: 2,4,6,8,12 TPI
  • Microperf options: 42 or 72 TPI
  • Scoring options: wide (standard) or narrow
  • Optional slitting blade available
  • Ability to control depth of each perf/score/slit independently
  • Automatic feed
  • Accurate .010" register
  • Microprocessor controlled with forward and backward stepping for easy programming
Graphic Whizard Creasemaster
Features
Electrical: 115V/60Hz/5A or 230V/50Hz/5A
Maximum Speed (impact creasing): 3000, 8.5 x 11"/A4 sheets per hour
Maximum Speed (rotary perf/score): 8000, 8.5 x 11"/A4 sheets per hour
Maximum stock size: 18 x 18" (45 x 45cm)
Minimum stock size: 3"W x 5"L (7.6cm x 12.7cm)
Stock weight: 12 lb. - 18 point (45-385 gsm)

Dimensions:

Length: 44" (1.12m) Width: 27" (0.69m) Height: 46" (1.17m) Weight: 158 lbs (72kg)
Perforation options: 2,4,6,8,12 teeth per inch (TPI) 42 or 72 TPI MICROPERF
Rotary score options: Wide or narrow
Strike Perf attachment: OPTIONAL
Impact creasing evolved because of the growing digital market, and the difficulty in finishing their printed material. There are two models to choose from: the CreaseMaster and CreaseMaster PLUS. The CreaseMaster (right) comes standard with Graphic Whizard's unique friction feed, while the CreaseMaster PLUS uses our "digital-friendly" horizontal suction feed.

Graphic Whizard electronics are the backbone to the CreaseMaster, and are the result of over 15 years of development and field-use on similar products.
  • Impact creasing significantly reduces cracking of digitally-printed substrates during the finishing process.
  • Inverted AND regular impact creasing in the same pass!
  • Up to 100 impact creases per sheet.
  • Up to 100 jobs can be stored into memory.
  • Easy-to-use programming. Set up in minutes!
  • Rotary perforations (at the entrance of the machine for accuracy; no tail whip) are anvil style and produce a "burr-free" finish.
  • Microperfs are also available.
  • Optional strike perf attachment available for "box" or "T" perfs.
  • NOTE: machines are pneumatic and require compressed air (compressor; not supplied) to operate.