Home | Monthly Specials | Company Profile | Our Clients | Equipment | Tech Support | Supplies | Contact Us

Copyright 2006, Paper Handling Solutions, Inc.
Site Design by Pat Frank

Inserters


PHS carries a variety of inserters.

 

Mailcrafter 1200X Edge Series Inserter
GBR FPF-35 Flat Pack Smart Inserter

 
Mailcrafter 1200X Edge Series Inserter
 

This rugged workhorse of the mailing industry is universally known as the best production value for the busy mail center and/or office environment. Engineered for reliable and long lasting service, the 1200, receiving periodic enhancements, has been in production for over 30 years. It will automatically collate, stuff, seal and stack envelopes or pass them through an inline postage meter to yield a finished mailing ready for bundling.

 

Specifications

Insert Stations Available:

4-6 and up

Insert Size:

Model 1200: 8 5/8" x 11 1/4" - ¼" thickness
(overall 3/8" max.)
Model 1200X: 9 5/8" x 13 1/4" - ¼" thickness
(overall 3/8" max.)

Envelope Size:

Model 1200: 9" x 12" - 4" x 7½" min.
Model 1200X: 10" x 14" - 4" x 8½" min.

Envelope Flap Depth:

3" Maximum

Power Requirements:

220 Volt Single Phase - 30 amp
220 Volt Three Phase - 20 amp

B.T.U. Ratings:

220 Volt Single Phase 2405 BTU/hr.
220 Volt Three Phase 1749 BTU/hr.

Machine Weights:
Sealer Roller:

1790 lbs.

Turnover:

2039 lbs.

Conveyor:

152 lbs.

(Add 900 lbs. for cabinet model)

 
  • PLC Control with Self Diagnostics
  • Sequential Start-Up/Shut-Down Programming
  • Station Toggle for Higher Production
  • Positive Vacuum Insert Selection
  • "Whisper" Vacuum Pump
  • Conjugated Cam Drive
  • Envelope Turn-Over, or Sealer Roller
  • Large 10" Operator Interface (Touch Screen)
  • Programmable Light Tower
  • Batch Running
  • Production Information
  • Rugged Drive System

GBR FPF-35 Flat Pack Smart Inserter
 

The FPF 35 Smart Feeder/Collector is designed to intelligently accumulate flat packs for mail production. The FPF 35 reads and collates up to 35, 20 lb. flat sheets at throughputs up to 40,000 sheets per hour, depending on set size and inserter cycle speed. The system has an advanced touch screen for operator programmable line code and barcode job set-up and recall.

 

Specifications

Speed:

Up to 40,000 documents per hour

Paper Sizes:

7"W x 5.5"L (min.)
11.75"W x 9"L (max.)

Paper Weight:

20-24 lb. Bond

Dimensions:

70"L x 26"W x 52"H

Electrical:

208 / 220 Volts, single phase, 50/60 Hz
208 / 380 Volts, three phase, 50/60 Hz

Weight:

Approximately 750 lbs.

Standard Equipment:

Double detect monitor; Non-read, fixed count operation; Intelligent error display including miss-feed and jam detection; Counter modes: total count, batch count, re-settable count

Optional Equipment:

Line code read system (OMR); Industry standard 1-D barcodes: 3 of 9, 128, and 2 of 5 interleaved; and 2-D barcode - Data Matrix; OCR/2-D barcode with Bell & Howell Jet Vision and Inspectron camera-based Vision systems; PBA document loader increases sheet capacity by 2,000 sheets
      • Collates up to 35, 20 lb. flat sheets
      • High-speed, up to 40,000 sheets per hour
      • Advanced operator touch screen
        for line code and barcode job set-up and recall
      • Runs on-line with intelligent flat sheet inserters
      • Continuous loading for non-stop operation